Manufacturers of Paver Blocks & Bricks Machine Plant
Manufacturers of Paver Blocks & Bricks Machine Plant
Metric Technical Specifications Sheet Conventional Hydraulic Press Brake Machine Series | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Model | Tonnage(MT) | Bending Capicity.(mm)(MS-UTS 45KG/mm2) | Table Size(mm) | Clear Passing(mm) | Ram Stroke(mm) | Open Height(mm) | Closed Height(mm) | Throat Depth(mm) | Ram Speeds (mm/sec.) | Motor (kw) HP | Overall Dimensions (mm) Approx. | Weight (kg)Approx. | ||||
Approach | Pressing | Return | Length | Width | Height | |||||||||||
CEWPBR-215 | 20 | 1.62 X 1500 | 125 X 1500 | 1250 | 100 | 250 | 150 | 100 | 40 | 6 | 38 | (2.2) 3 | 1800 | 1500 | 2000 | 1500 |
CEWPBR-320 | 30 | 2 X 2000 | 125 X 2000 | 1700 | 100 | 280 | 180 | 200 | 30 | 7 | 30 | (2.2) 3 | 2300 | 1600 | 2000 | 2500 |
CEWPBR-425 | 40 | 2 X 2500 | 170 X 2500 | 2000 | 100 | 280 | 180 | 200 | 50 | 6 | 50 | (3.75) 5 | 2700 | 1900 | 2100 | 3000 |
CEWPBR-520 | 50 | 3.15 X 2000 | 170 X 2000 | 1500 | 100 | 280 | 180 | 200 | 48 | 6 | 48 | (3.75) 5 | 2300 | 1900 | 2200 | 3400 |
CEWPBR-525 | 50 | 2.5 X 2500 | 170 X 2500 | 2000 | 100 | 280 | 180 | 200 | 48 | 6 | 48 | (3.75) 5 | 2900 | 1900 | 2200 | 3700 |
CEWPBR-625 | 60 | 3.15 X 2500 | 170 X 2500 | 2000 | 150 | 330 | 180 | 200 | 36 | 5 | 36 | (3.75) 5 | 2900 | 2000 | 2400 | 3900 |
CEWPBR-630 | 60 | 2.5 X 3000 | 170 X 3000 | 2500 | 150 | 330 | 180 | 200 | 36 | 5 | 36 | (3.75) 5 | 3200 | 2000 | 2300 | 4500 |
CEWPBR-825 | 80 | 4 X 2500 | 170 X 2500 | 2000 | 150 | 350 | 200 | 200 | 45 | 6 | 48 | (5.5) 7.5 | 2800 | 2100 | 2400 | 4500 |
CEWPBR-830 | 80 | 3.15 X 3000 | 170 X 3000 | 2500 | 150 | 350 | 200 | 200 | 45 | 6 | 48 | (5.5) 7.5 | 3400 | 2100 | 2400 | 5000 |
CEWPBR-1025 | 100 | 5 X 2500 | 170 X 2500 | 2000 | 150 | 350 | 200 | 200 | 38 | 5 | 38 | (7.5) 10 | 2900 | 2200 | 2400 | 5600 |
CEWPBR-1030 | 100 | 4 X 3000 | 170 X 3000 | 2500 | 150 | 350 | 200 | 200 | 38 | 5 | 38 | (7.5) 10 | 3400 | 2200 | 2400 | 6200 |
CEWPBR-1230 | 125 | 5 X 3000 | 220 X 3000 | 2500 | 150 | 350 | 200 | 300 | 30 | 5 | 60 | (7.5) 10 | 3400 | 2500 | 2600 | 7000 |
CEWPBR-1240 | 125 | 4 X 4000 | 220 X 4000 | 3000 | 150 | 350 | 200 | 300 | 30 | 5 | 60 | (7.5)10 | 4200 | 2500 | 2600 | 8700 |
CEWPBR-1630 | 160 | 6 X 3000 | 220 X 3000 | 2500 | 150 | 350 | 200 | 300 | 30 | 5 | 60 | (11.2) 15 | 3400 | 2500 | 2600 | 8800 |
CEWPBR-1640 | 160 | 5 X 4000 | 220 X 4000 | 3000 | 150 | 350 | 200 | 300 | 30 | 5 | 60 | (11.2) 15 | 4200 | 2500 | 2700 | 9800 |
CEWPBR-2030 | 200 | 8 X 3000 | 220 X 3000 | 2500 | 200 | 410 | 210 | 300 | 20 | 5 | 50 | (15) 20 | 3500 | 2700 | 2700 | 9500 |
CEWPBR-2040 | 200 | 6 X 4000 | 220 X 4000 | 3000 | 200 | 410 | 210 | 300 | 20 | 5 | 50 | (15) 20 | 4200 | 2700 | 2800 | 10500 |
CEWPBR-3030 | 300 | 12 X 3000 | 300 X 3000 | 2500 | 200 | 460 | 260 | 300 | 19 | 5 | 30 | (18.75) 25 | 3500 | 2700 | 2800 | 12000 |
CEWPBR-3040 | 300 | 10 X 4000 | 300 X 4000 | 3000 | 200 | 460 | 260 | 300 | 19 | 5 | 30 | (18.75) 25 | 4300 | 2800 | 2900 | 15000 |
CEWPBR-4040 | 400 | 12 X 4000 | 400 X 4000 | 3000 | 250 | 500 | 250 | 400 | 20 | 5 | 40 | (22.4) 30 | 4300 | 2900 | 3000 | 18000 |
Note : Above This Parameters will slightly change in NC version. |
In air bending the dies are made at more of an acute angle (85′ or less than the angle to be formed.The only contact between the dies and the material occurs at the male punch and edge of the female die.The material is ”Air” bend rather than ”Coined” od ”Bottom” bend.
V= 6 to 8 x Material Thickness (t),When t < 4 KxLxSxt2
V= 8 to 12 x Material Thickness (t),When t > 4
Load, P = KxLxSxt2 \ 1000xV MT
Press Brake Selection Guidelines | |
---|---|
Parameter | Unit |
Plate Thickness (t) | mm |
Ultimate Tensile Strength Of Plate (S) | kg/mm2 |
Bending Length (L) | mm |
” Vee” Die Opening (V) | mm |
Minimum Internal Radius ( R ) | mm |
Minimum Flange (H) | mm |
Bending Correction Factor (K) | 1.3 |
Required Tonnage (P) | MT |
The Force required for air bending can be calculated from the formula: |
Since its commencement in 1991, Chamunda Engineering Works is instrumental in manufacturing Shearing Machine, Hydraulic Press Brake Machine, and Die Block. Our offered products range is well appreciated in the market, owing to their sturdy design, high impact and pressure bearing capacity, and dimensional accuracy.
Shed No.7, Parishram Industrial Estate, Jantanagar, Ramol, Ahmedabad-382449, Gujarat, India.
Contact Us
Shed No.7, Parishram Industrial Estate, Jantanagar, Ramol, Ahmedabad-382449, Gujarat, India.
Plot no.36, Sadbhav Estate, undrel Dhamatwan road, Dhamatwan Village, Bakrol, Gujarat, Ahmedabad - 382435
© Copyright 2022 Chamunda Engineering Works. All Rights Reserved. | Design and Dizital Marketing by Innovative Ecom
Click one of our contacts below to chat on WhatsApp